Bucket elevator is a new type of elevator product developed by introducing foreign advanced technology, which is applied in various industries. It is suitable for lifting from low place to high place. After the supplied materials are put into the hopper through the vibration table, the machine will automatically and continuously move upward. According to the transmission capacity, the transmission speed can be adjusted, and the lifting height can be selected as needed. The hopper is designed and manufactured by ourselves. The PP non-toxic hopper makes the bucket elevator more widely used. All dimensions are designed and manufactured according to the actual needs. It is designed for supporting vertical packaging machine and computer metering machine, which is suitable for the lifting and feeding of food, medicine, chemical industry products, screws, nuts and other products The automatic stop and start of the machine is controlled by the signal recognition of the packaging machine. The elevator is suitable for vertical transportation of medium, large and abrasive materials (such as limestone, cement clinker, gypsum and lump coal), and the material temperature is controlled below 250 ℃.
Working principle of bucket elevator:
The hopper scoops up the material from the storage below. As the conveyor belt or chain is lifted to the top, it turns down after bypassing the top wheel. The bucket elevator will dump the material into the receiving tank. The drive belt of bucket elevator with drive is generally rubber belt, which is installed on the lower or upper drive roller and the upper and lower change direction roller. The chain driven bucket elevator is generally equipped with two parallel drive chains, with a pair of drive sprockets on or below, and a pair of change direction sprockets on or above. Generally, bucket elevator is equipped with shell to prevent dust flying in bucket elevator.
Features of bucket elevator:
1. The driving power is small, adopting the dense arrangement of inflow feeding, induced discharging and large capacity hopper, there is almost no phenomenon of returning and digging when the material is lifted, so the invalid power is small.
2. It has a wide range of lifting. This kind of lifting machine has few requirements for the types and characteristics of materials. It can not only lift the general powder and small particle materials, but also lift the materials with higher grindability, good sealing performance and less environmental pollution.
3. The operation reliability is good. The advanced design principle and processing method ensure the reliability of the whole machine operation, and the failure free time is more than 20000 hours. The lifting height is high. The elevator runs smoothly, so it can reach a higher lifting height.
4. It has a long service life, the feeding of the elevator adopts inflow type, without bucket digging, and there is little extrusion and collision between materials. The machine is designed to ensure that the materials are less scattered during feeding and unloading, and reduce the mechanical wear.
5. High precision. After flanging, middle pressing bar and welding, the shell has good rigidity and beautiful appearance.
6. The mechanical size is small. Compared with other hoists with the same lifting capacity, the mechanical size of this kind of hoists is smaller.
7. This series of hoists have many specifications from ne15 to ne800. The lifting capacity range is 15-800m3 / h.
8. Easy to operate, less maintenance, less wearing parts. The conveyor chain is a sleeve roller chain, which is used for the vertical lifting of various powder and block particles.
9. The conveyor chain adopts the face contact of the plate chain instead of the point connection of the traditional bucket lifting ring chain, which greatly improves the service life of the conveyor chain, and the service life of the conveyor chain can reach more than five years.
Main components of bucket elevator:
The bucket elevator is composed of shell, traction part (conveyor chain), hopper, driving wheel (head wheel), steering wheel (tail wheel), tensioning device, guide device, feeding port (feeding port) and discharging port (discharging port).
Technical parameters of bucket elevator:
|Model||Lifting capacity (m3/h)||Material block size|
next page:Screw conveyor