Welcome to Henan Baihao Machinery Equipment Co., Ltd.
Navigation
{dedeBaihao news {dede:
Baihao news
Industry news
Industry knowledge
/dl>
Contact us
hotline
{dede:global.cfg_p13523056494t>
Address: Shihuiwu industry zone, Gongyi City, Henan Province
QQ: 2942749158
E-mail:2942749158@qq.com
location: Home > english > News > Baihao news >
Small rice mill can easily deal with various faults
author:Baihao Machinery     time:2020-05-27
With the continuous increase of using time, even the small-scale rice mill with excellent characteristics has more or less equipment failures, which leads to the production and manufacturing can not be carried out normally. In order to prevent more serious property loss, it is necessary to grasp the common troubleshooting methods of the small-scale rice mill immediately. In order to further improve the quality and efficiency of common troubleshooting of small-scale rice mills, this chapter simply summarizes a number of common troubleshooting problems of rice mills with high frequency, and carries out detailed scientific research and Analysis on the causes and removal methods of common failures for reference.
If the material curtain of the separated box is distributed unevenly, the total width of the separated box population shall be adjusted; if the outlet of the dust remover or centrifugal fan is blocked, it shall be discharged, with sundries and smooth wind.
Rice mill
1: The bran is not clean
If the material curtain of the separated box is distributed unevenly, the total width of the separated box population shall be adjusted; if the outlet of the dust remover or centrifugal fan is blocked, it shall be discharged, sundries shall be discharged, and the air shall be spread smoothly; if the air inlet pipe is blocked, the common faults of the ventilation shall be removed; if the oil pipe pressure of the gate plate at the outlet of the centrifugal fan is insufficient, the gate plate at the outlet of the centrifugal fan shall be enlarged; if the speed of the small rice mill is insufficient, the gate plate at the outlet of the centrifugal fan shall be enlarged If the ratio is insufficient, the speed ratio shall be increased.
2: Block
If the total flow at the inlet is too large, the inlet shall be closed, the outlet shall be opened, the belt shall be rotated and the raw materials shall be discharged; if the drive belt of the small rice mill is seriously deviated, the drive belt shall be tensioned; if there are too many sundries in the rice, the sundries in the rice shall be eliminated; if there are too much moisture in the rice, the whip shall be blocked, the rice shall be baked, the moisture shall be reduced, and the rice screen shall be lifted to discharge the bran.
3: Too much broken rice
If the rice is not dry, the grain shall be air dried to make the moisture content of 12-14%. If the clearance between rice knife and roller big end is too small, the clearance shall be increased again; if the oil pipe pressure of the gate plate at the outlet is very small, the oil pipe pressure shall be increased; if the total number of the round hole sieve of the rice sieve is insufficient or the width of the round hole sieve is very small, the rice sieve shall be removed and replaced again according to the instructions of the small rice mill.
4: Too much grain
If the gap between the rice knife and the roller is too large, the gap shall be reduced; if the adjustment of the gate plate at the inlet of the small rice mill is not good, the gap shall be readjusted; if the grain is too wet, the grain shall be dried to make the moisture content of 12-14%. If the sand or the reinforcement of the roller is damaged, the roller shall be removed and replaced.
5: Guzui is too much
If the opening of the flow screen of the small rice mill is blocked, the round hole screen shall be removed. If the angle of view of the flow screen is not appropriate, the angle of view of the flow screen shall be adjusted. If the hole of the flow screen operator is very small, the new 12-14 mesh flow screen shall be replaced.

Henan Baihao Machinery Equipment Co., Ltd.

address:Limestone Industry Zone, Gongyi City, Henan Province   Telephone:13523056494

technical support:Baihao Machinery